Main function：

1.  Punch the hole for chip of the inlay, which ensure the modules and the PVC  embedding at the same plane and protect the chips.

2.  The machine have two moulds with two different sides, it can be used for  different production technology, just press the switch to select the mould.

3.  The pitch and the size of the punching mould can be adjusted according to the  requirement.

4.  The cylinder drives punching mould up and down with the low noise.

5.  PLC control and can be punched different layout,

6.  Use the precision mould to punch and ensure the quality of the products.

7.  The life time of the mould is: It only need to be whetted every two million  times punching

8.  Materials are loaded using the dowel pin, easy to adjust

9.  Use the servo system to position which ensure the position accurate

10.Use  the Delta PLC and the touch screen, stable and visualized.

Equipped with:

Control  system:   Mitsubishi PLC      

Servo  system:     Taiwan DELTA

Zero-dedect  induction switch: SUNX

Screw:             Taiwan HIWIN            

Slider:             Taiwan HIWIN             

Power  supply:     Taiwan MeanWell         

Air  cylinder:      SMC

Solenoid   valve:   SMC

Punching  mould:  Made by YMJ

Technical parameter：

Overall dimension:               Approx. L1400*W800*H1300㎜

Weight:                         Approx. 600kg

Power supply:                   AC220V 50/60HZ 5A

Power:                         1KW

Control:                        Servo positioning + PLC

Tolerance of hole size:          ±0.05mm

Accuracy of punching:          ±0.05mm

Tolerance of center distance  between two hole is : ±0.05mm

Tolerance of burr:              ≤0.08mm

Applicable materials:           0.1~0.3mm thickness of PVC, PETG and ABS  sheet, 0.1mm PC sheet

Operator:                     1 person

Output rate:                   About 6000pcs/hr

The life time of the mould is:   It can  be punched three million times before regrind.

Air pressure:                  6 kg /c㎡

Air consumption:              700L/min

Product  percent of pass:       99.8%