Main function：：

1.  After chip placing and wire embedding, the bonding machine can finish the  welding of wire and chip.

2.  Use the double pulse current inverter welding machine, convenient and  directly to monitor the welding, precision and high quality.

3.  The welding inverter can be adjusted according the production process.

4.  Servo system controls the position of welding heads, which ensure the welding  quality and protect the welding heads.

5.  It can weld the different layout., each layout setting can be called directly

6.  The welding heads can be adjusted at X、Y、Z direction.

7.  No need for air supply。

8.  Welding with the low noise

9.  The machine can be installed 8 heads at most, and 1 to 8 welding heads  welding at the same time

10.Materials  are loaded using the dowel pin, easy to adjust.

11.Use  the servo system to position to ensure the position accurate.

12.Use  the Delta PLC and the touch screen, stable and visualized.

Equipped with:

Control  system:   Mitsubishi PLC       

Servo  system:     TECO+DELTA

Zero-dedect  induction switch: SUNX

Fiber  optic sensor: SUNX

Screw:             Taiwan HIWIN                                     

Slider:             Taiwan HIWIN             

Power  supply:     Taiwan MeanWell         

Solenoid   valve:   SMC

Welding  inverter:  Made in China

Welding  tip:       Made by YMJ

Technical parameter：

Overall  dimension: Approx. L1500*W1450*H1800㎜ 

Weight:            Approx. 850kg

Power  supply:     AC220V 50/60HZ 25A

Power:             4KW

Bonding stations:      4

Control:           Servo positioning+ PLC

Accuracy:         Scale of servo system = 0.01mm

Applicable  materials: The Inlay finished module placing and wire embedding

Operator:          1 person

Output  rate:       About 3200-4000pcs/hr

The  life time of the welding tip is : twenty thousand to sixty thousand welding  points

Product  percent of pass: 99%